SYSTEM OVERVIEW
The W90CT water purification system comes equipped with all the standard features one could
expect from a state-of-the-art purification system from Wellsys. Highlights include:
•
In tank UV
•
Full size Wellsys Quick change filter system
•
Customizable filter alerts
•
Leak stop
•
Touch free PSD sensors for selecting water temperature and dispensing water
•
10.8” dispense area
•
Color changing dispense light (Blue for cold, Red for hot)
•
Cold Dispense pump for improved dispense flow
•
Hot Dispense pump improves hot water dispensing experience
The Wellsys W9CT is available in two filter configurations:
1.
W9CT R0
This Wellsys model filters your water through a series of
filters including a RO membrane to remove
contaminants. These are:
A. 10 micron sediment filter (P/N
QC- WS- Sediment
)
B. 5 micron pre-carbon block filter (P/N
QC- WS- Pre Carbon
)
C. 80 gallon per day RO membrane (P/N QC- WS- RO).
D. Bio-Sure Plus filter mineral filter (P/N QC-WS- BSP RO)
E. Granular Activated Carbon with 1 micron sediment filter (TCR) (P/N QC- WS-
TCR)
2.
W9CT UF
This Wellsys model filters your water through the following filters.
A. 10 micron sediment filter (P/N QC- WS- Sediment)
B. 5 micron pre-carbon block filter (P/N QC- WS- Pre Carbon)
C. UF membrane (P/N
QC- WS- UF
)
D. Bio-Sure Plus filter mineral filter (P/N QC-WS- BSP UF)
E. Granular Activated Carbon with 1 micron sediment filter (TCR) (P/N QC- WS-
TCR)
*The UF configuration should be used with TAP TDS no greater than 70PPM. If using in
over 70PPM locations the mineral filter should be removed. Please note that defects due
to scale are not considered manufacturer defects and are not considered warranty items.
4
4