5. Care Instruction
Do not use abrasive, cleanses to cleaning up the pan and toilet seat as they may scratch
and dull the pan and seat surface. Do not use cleaners containing chlorine as it can seri-
ously damage of fitting.
Use warm spongy water or liquid detergent to clean the surface and dry with soft cloth.
6. Problem and solution
A: The fill valve not turn off.
•
Open the cap of the fill valve and clear the valve seal, or replace the seal if it is
defective or cracked.
•
The position of the floater may too high, adjust the valve floater by adjust the thread
nod.
•
Replace the flapper if it is worn.
•
Check the tightening of the mechanism.
B: Water leaks out under the cistern:
•
Fitting screws must be tightened.
•
The gasket between the pan and the cistern is badly positioned or it is worn, replace
the gasket.
C. Poor flush performance
•
Adjust the water level inside the cistern.
•
Check if the water supply valve is fully open.
•
Clear obstructions from the trap way and pan rim holes.
D. No flush
•
Check if water supply valve is closed.
•
Check if the water supply hose is blocked.
E. Long time require to fill the cistern.
•
Check if the water supply valve is fully open.
•
Check the hose of inlet valve if any leaks.
