12
13
OPERATION
Picture 18
Picture 19
Picture 20
Picture 21
OPERATION
11
Picture 15
Picture 16
Picture 17
Note: Standard tire pressure is the cold tire pressure recommended by the
tire manufacturer.
High temperature threshold setting:
Pre-ser threshold is “80
”.Press
DOWN key for 3 seconds then press UP key, when W-T is displayed
press Enter key. Press UP key and DOWN key to adjust the value. Press
Enter key to confirm the setting.
Press the DOWN key for 3 seconds , press the UP key to make “ L-C ” displayed ,
then press Enter key to select right front tire and “ F0 ” displayed. Select the
tire to be set up by UP key and make the new sensor send out RF signal, sensor ’s
ID ( like “26 E2” ) will be displayed after the receiver received the information ,
then press Enter key to accept it with “ --- ” displayed(system will ignore
the ID if Down key is pressed). After that , press UP key till F0~F3 displayed
and press Enter key to finish setting up.
D
)
set up sensors