Wellgain Auto Technology WT310 User Manual Download Page 12

SERVICE AND WARRANTY

2. Change or Modify the product without any authorization
3. Damage caused by wrong operations
4. Repair without authority
5. Other damage not because of design, technical, manufacturing

and quality problem of the system.;

6. Under the extreme temperature and environment or influenced

by corrosion and oxidation.

7. The non-renewable parts such as battery.

1. The data of tire pressure and temperatures displayed by our

TPMS are just for warning, so the data itself cannot prevent the
car from occurring accident.

2. Our TPMS is a safety system that monitors the conditions of tire

pressure and temperature. When the condition is abnormal, our
TPMS warns the driver to take precautions so as to prevent
traffic accident. But it doesn't mean usual checking of the tire is
no longer necessary. Drivers should follow the Car User Manual
to take usual check of the tire condition. If the accident is caused
by the abrasion, crack, break of the tire or perforation into the tire,
our TPMS is not responsible for it.

3. This system complies with part 15 of FCC Rules. Operation must

be subject to the following two conditions: (1) This system does
not cause harmful interference, and (2) this system can operate
normally in any interference received, including interference that

Important Statement

Warranty Clause

Guarantee:

Warranty Date

How to get the warranty service

Exception to Warranty:

In the period of warranty, our dealer and the service

center can repair this product to correct the flaw of the material,
design or workmanship in the reasonable time on business. The
product can be changed if we think necessary.

Guarantee period is 12 months counted from the purchase day.

User must show
1. Product part of influence
2. Invoice that name and date could be read clearly
3. Warranty card.

1. Normal abrasion

SERVICE AND WARRANTY

SERVICE AND WARRANTY

18

19

Working temperature: -40 ~ +125

Pressure detecting range 0-3.5Bar
Pressure detecting

0.1Bar

Temperature detecting range

40 ~ +125

Temperature detecting a

2

at

 

   

accuracy

at 25

ccuracy

25

Summary of Contents for WT310
















Reviews: