23
EN
Starting up the device
Caution!
Please be sure to read and follow the opera-
ting instructions for your Weller Supply Unit.
Put the tool into operation as described in the
chapter „Placing into operation“.
Check to see if the mains voltage matches the
ratings on the nameplate.
Care and maintenance
Warning!
Before doing any work on the machi-
ne, pull the plug out of the socket.
Warning!
Use original replacement parts only.
Warning! Risk of burns
Only replace solder tips when cold
Only replace the soldering tips when they are cold.
The soldering tool must be left switched off in the
safety rest for at least 3 minutes until the soldering
tip has cooled down. The LED status indicator
must be at „OFF“.
Keep the heat transfer surfaces of the soldering tip
and heating element clean. The heating element
must not come into contact with soldering tin.
Clean the operator panel, if dirty, using a suitable
cleaning cloth.
Technical Data
Solder wire feed system
WTSF 80
WTSF 120 / WXSF 120
Power supply unit
Input
Output
100 - 240 V
~
50-60 Hz
12 V 1500 mA
100 - 240 V
~
50-60 Hz
12 V 1500 mA
Rated input
86 W
126 W
Mains supply voltage
24 V AC
24 V AC
Weight
approx. 1 kg
approx. 1 kg
Safety class
Safety class Feed unit
I
III
I
III
Temperature range
Celsius:
100 - 450°C
Fahrenheit: 200 - 850°F
Celsius:
100 - 450°C
Fahrenheit: 200 - 850°F
Heat-up time (approx.) in
seconds
(50°C to 380°C) (120°F to 660°F)
10
14
Tip top condition
LT
XT
Summary of Contents for WTSF 120
Page 13: ...13 13 14 9 10 11 8 12 ...
Page 131: ......
