Weller PUD 151R, Instructions Manual

Page: 14 / 34

4-10 WSD 151 / PUD 151R
2.1 Intended use
Use the WSD 151 / PUD 151R soldering station exclusively for the
purpose indicated in the Operating Instructions of soldering and
unsoldering under the conditions specified here. Specified use of the
WSD 151 / PUD 151R soldering station also includes
− observing these Operating Instructions,
−
observing all other accompanying documentation,
− observing locally applicable accident prevention regulations.
The manufacturer assumes no liability for uses other than those
specified in the operating manual as well as arbitrary modifications
to the device.
3 Scope of supply
−
Soldering station WSD 151 T005 32 766 99
−
Soldering station PUD 151R T005 32 786 70
− Power cable
−
Jack connector
− WSD 151 / PUD 151R operating manual
− Safety information booklet
−
Equipotential-bonding connector (PUD 151R)
4 Device description
The microprocessor-controlled WSD 151 / PUD 151R soldering
station is a versatile soldering unit designed for performing
professional repair work on state-of-the-art electronic assemblies in
the industrial engineering sector as well as repair workshops and
laboratories.
Precise temperature control performance at the soldering tip is
guaranteed by the digital control electrotechnology together with
superior-quality sensor and heat-transfer technology. High-speed
measured-value acquisition provides for maximum temperature
precision and optimum dynamic temperature performance in load
situations.
The required temperature setting can be adjusted between 50 °C
and 550 °C (150 °F–999 °F). Setpoint and actual values are
displayed in digital form. A flashing optical control check (red LED)
indicates that the preselected tool temperature has been reached.
Continuous illumination indicates that the system is warming up. If
the temperature is outside of the preset temperature window, "HI"
(temperature too high) or "LO" (temperature too low) appears on the
display every two seconds.