wellbots Evapolar Product Manual Download Page 4

— If you do not plan to use the device for a long time, empty the water reservoir and let the device work 

at maximum power for at least 4 hours so that the cartridge can dry out.

— Only use the original power supply from the package.

— Do not touch the power supply or power cord with wet hands.

— Unplug the device in case of the following: cleaning, technical maintenance, removing/replacing 

elements, moving the device. 

— To maximize the effect the device should be placed on a higher surface, e.g. a table or a cupboard. 

— Do not place the device next to a heater or in proximity of any electrical equipment.     

— Do not place the device in passageways or any other location from where it can be accidentally 

knocked over. 

— Do not let any foreign objects inside the device.

— Do not place heavy items on top of the device.  

— Do not block the front and back grills of the device.

— Do not turn the device upside down; it will disrupt its functionality. 

— Do not submerge the device into water or other liquids, see cleaning guide below.

— Do not place open fire sources (candles, etc.) on top of the device. 

— People with limited physical, visual or mental abilities or lacking proper experience and/or knowledge 

should never use the device without supervision of those responsible for their safety or those capable of 

assistance in using the device. 

— The device can be switched off completely only when disconnected from the power supply.

— The manufacturer does not bear any responsibility for any damage arising from failure to comply 

with this product guide. 

— A replaceable evaporative cartridge is designed specifically for this product. If your cartridge has 

been broken or damaged, you can purchase a replacement at Evapolar.com or with your local retailer.  

2.

Summary of Contents for Evapolar



















Reviews: