wellbots Evapolar, Product Manual

Page: 3 / 18

Introduction
Congratulations! You bought Evapolar, your personal air cooler. To take full advantage
of the device please read the product guide before you start using it.
Intended use:
Evapolar is intended to cool and humidify the air creating a local microclimate in the area of 3-4 sq. m
(30-45 sq ft.). It also has a purification effect, filtering large dust particles from the air. The best effect
can be achieved indoors.
Safety regulations:
— The device will work correctly when placed on a smooth horizontal surface. Tilting it may cause a
water leak and damage the device.
— Do not carry the device when it is filled with water. Even after you empty the reservoir, some water
will still remain in the internal compartment. Please check the part of this manual about the device
transportation.
— For personal safety and proper functionality of the device use only clean, untainted tap water. If the
source of water is polluted and you are not sure about its safety, please use distilled water. It is rec-
ommended to perform the cleaning and technical maintenance of the device according to the “Device
maintenance” section of this product guide.
— The device is not intended for use in a highly polluted environment. Large dust particles, dirt, etc.,
can seriously affect the longevity of the device’s evaporative cartridge lifecycle.
— The device is not intended for use in a highly polluted environment. Large dust particles, dirt, etc.,
can seriously affect the longevity of the device’s evaporation cartridge lifecycle.
— Make sure water does not reach the external parts of the device. Do not use it near water, in a swim-
ming pool, in a bathroom, in a laundry room, outdoors when raining or at any other locations with high
humidity levels.
— In case of a leak or if water spills to the surface of the device, immediately disconnect the power cord
and let the device dry for at least 24 hours.
— Do not place the device under direct sunlight.
1.