11
2.4.3 Connection Setup for HDMI/CVBS/SDI signal input
Connect HDMI/CVBS/SDI signal to NB100U “HDMI IN”/”AV
＆
CC IN”/ “YPbPr IN”/”SDI IN” port
with a HDMI / AV
＆
CC / YPbPr /SDI cable.
3 OPERATION GUIDE
3.1 Front Panel Operation
3.1.1 Power Up and Initialize
Before powering-up the device, make sure that all cabling is correct (refer to chapter 2.4 of this
manual). The device is correctly connected to the power inlet.
Connect the Power port and the unit is powered up and starts the initialization.
The LCD screen lights up, and displays information as below:
The initialization takes about 20 seconds to complete, and then the LCD screen shows as below
:
Note:
If the unit fails to initialize and hangs at the “booting” stage, switching off the device and
powering up again may help. If the device still fails to initialize, please contact your service
representative for help.
3.1.2 Front Panel Menu Structure
1
st
Layer
2
nd
Layer
3
rd
Layer
4
th
Layer
Status
Live
Playing
Playing
Paused
Playback
Playing
Paused
Normal Start Up
