Wella Pro Straight, Instruction Manual

Page: 40 / 168

ENGLISH
40
5. Starting at the back of the neck, separate strands about 1 cm
thick. (The thinner the strand, the greater the straightening
effect.)
6. Place the root zone of a strand between the heating plates.
7. Now slide the
Pro-Straight Color
steadily from the root of the
hair strand to the end. Never stay longer than 2 seconds in one
place.
8. Repeat steps 5. to 7. with the remaining strands.
9. Switch off the appliance with the On/Off switch and allow it
to cool.
10. Pull out the mains plug once you have finished the treatment
and the appliance has cooled down.
11. To fix the hairstyle, apply Wellastrate Neutralizing Emulsion
strand by strand. After the exposure time, rinse the hair
thoroughly.
12. Then shampoo the hair with a haircare product from the
Lifetex
or
SP
range and rinse again thoroughly.
13. Finish by applying Wellastrate Straight Saver evenly to the
damp hair, then rinse out after 3 minutes.
7 Cleaning
To ensure perfect functioning and full performance from your
Pro-
Straight Color
, clean the appliance regularly. Do not use flammable
or aggressive cleaners or abrasive scourers.
Important: Before cleaning the appliance, always pull out the
mains plug. Allow the appliance to cool down before cleaning it.
Cleaning the appliance
From time to time, wipe all parts of the appliance with a slightly
moistened cloth, then rub dry.
PS color.book Seite 40 Dienstag, 20. April 2010 6:27 18