11
12
INSTALLING BATTERIES
1. Press down on latch and lift the battery cover to open the
battery compartment.
2. Install or replace 4 “AAA ” sized alkaline batteries in the
battery compartment according to the indications inside the
compartment.
3. Close the battery cover by pushing in the top end of the
battery door.
Replace the batteries if:
• The weak battery symbol appears on the display.
• Nothing appears on the display when the power is switched on.
Note:
• Date and time will need to be reset if batteries are removed or
replaced.
• Replace all batteries at one time (as simultaneous set). Use only
1.5V “AAA” alkaline batteries.
• When the batteries are removed, the measurement values
stored in memory are retained. However, the Date & Time must
be re-set.
• Remove batteries when unit is not in use for extended periods
of time.
• Clean contacts on battery and in battery compartment with a
soft dry cloth each time you install batteries.
• Batteries are hazardous waste. Do not dispose of them
together with the household garbage.
USING THE AC ADAPTER
1. Connect the AC adapter with the AC adapter jack in the
back of the unit as shown below.
2. Please use only the AC adapter included with this
monitor.
Note:
• Date and time will need to be reset if AC adapter is
unplugged and unit is without batteries.
• When the AC adapter is your main power supply, make
sure the adapter plug can be easily removed from the unit.
• Please unload the batteries when operating with an AC
adapter for an extended period of time. Leaving the
batteries in the compartment for a long time may cause
leakage, which may lead to damage to the unit.
• No batteries are needed when operating with an AC
adapter.
Battery
Cover
AC Adapter
Input: 100-240V~0.18A-0.20A 50/60Hz
Output: 6V DC 1A 6W Max
Connect
AC Adapter
here
