RADIO OPERATIONS
FM Radio Operations
To
Do this
Turn radio on or off Press “ ” button (6)
Automatically scan
for the next station
Press and hold down “HOUR / TUN-” button (4) or “MIN /
TUN+” button (5)
Manually tune
Press “HOUR / TUN-” button (4) or “MIN / TUN+” button (5)
repeatedly
Change volume
(level 0-16)
Press “AL1/VOL-” button (2) or “AL2/VOL+” button (3)
Set preset station
Select radio frequency. Press and hold down “MEMORY TIME
SET” button (1). Press “HOUR / TUN-” button (4) or “MIN /
TUN+” button (5) to change preset station number. Press
“MEMORY TIME SET” button (1) to confirm.
Change preset
stations (1-20)
Press “MEMORY TIME SET” button (1) repeatedly.
Start sleep mode
With the radio on, press “SNOOZE SLEEP / DIMMER” button
(7) to enter sleep mode. Choose between 10 to 90 minutes.
(Indicator C will be on).
AMBIENT LAMP
Press “LIGHT” button (8) to turn lamp on and off.
NOTES
Please replace all batteries at the same time with only new batteries. Remove all batteries when the clock
radio is not in use for extended periods of time.
Place the clock radio only on protected furniture. Avoid direct sunlight and any area that may be exposed
to water or moisture.
DO NOT PLUG THE RADIO INTO AN ELECTRICAL OUTLET IF YOU ARE UNSURE OF THE VOLTAGE.
Waste electrical and electronic equipment are a special waste category,
collection, storage, transport, treatment and recycling are important because
they can avoid environmental pollution and are harmful to health. Submitting
waste electrical and electronic equipment to special collection centers makes
the waste to be recycled properly and protecting the environment. Do not
forget! Each electric appliance that arrives at the landfill, the field, pollutes the
environment!
Importer & distributor:
SC VITACOM ELECTRONICS SRL
CIF: RO 214527
Tel. 0264-438401*
Summary of Contents for TWILIGHT
Page 2: ......
