FEATURES
Ambient light
Digital alarm clock with 9-minute snooze function
Integrated FM radio
Wake to radio or buzzer
Fall asleep to the radio
LED clock display
CLOCK and ALARM CLOCK OPERATION
Note: The time and alarm times cand only be set when the radio is turned off.
TIME SET
1.
The digits will flash after connecting power to the radio, or press and hold down “MEMORY TIME SET”
button (1) for approximately 3 seconds until the display flashes.
2.
Press “HOUR / TUN-” button (4) repeatedly to change the hour setting.
3.
Press “MIN / TUN+” button (5) repeatedly to change the minute setting.
4.
Press “MEMORY TIME SET” button (1) to confirm the time.
ALARM SET
This clock radio has dual alarms that can be set and used simultaneously and the procedures are the same.
Both alarms can either sound the buzzer or wake up to radio. Follow the instructions below to set alarm
time 1. For alarm time 2, substitute “AL1/VOL-” button (2) with “AL2/VOL+” button (3).
1.
Press “AL1/VOL-” button (2) to view alarm time 1. The digits will flash.
2.
Press “HOUR / TUN-” button (4) repeatedly to change the hour setting.
3.
Press “MIN / TUN+” button (5) repeatedly to change the minute setting.
4.
Press “AL1/VOL-” button (2) once to confirm and digits will stop flashing.
ACTIVATING THE ALARM
1.
Once the alarm time is set, press “AL1/VOL-” button (2) once for alarm with buzzer (Indicator A will be
on) and twice for alarm with radio (Indicator B will be on).
2.
Digits will stop flashing after a short while.
3.
Press “AL1/VOL-” button (2) until all indicators off to turn off alarm.
4.
When the alarm/radio sounds, press “ ” button (6) to turn alarm off or press “SNOOZE SLEEP /
DIMMER” button (7) for 9-minute snooze.
DISPLAY BRIGHTNESS
When the radio is off and the current time showing, press and hold “SNOOZE SLEEP / DIMMER” button (7)
to change the brightness of the display between high and low.
Summary of Contents for TWILIGHT
Page 2: ......