UNPACKING INSTRUCTIONS
Carefully open the carton, remove contents and lay out on cardboard or other protective surface
to avoid damage.
Check package contents against the Supplied Parts List in the next page to assure that all
components we received undamaged. Do not use damaged or defective parts.
Carefully read all instructions before attempting installation.
IMPORTANT SAFETY INFORMATION
Install and operate this device with care. Please read this instruction before installation, and
carefully follow all instructions contained. Use proper safety equipment during installation.
Please call a qualified installation contractor for help if you don’t understand these directions or
have any doubts about the safety of the installation.
Do not use this product for any purpose or in any configuration not explicitly specified in this
instruction. We disclaim any and all liability for injury or damage arising from incorrect
assembly, incorrect mounting, or incorrect use of this product.
Supplied Parts List
CAUTION
This monitor desktop mount must be securely attached to the horizontal desk. If the mount is not
properly installed it may fall, resulting in possible injury and/or damage.
STEP 1. Install the Pole to the Desktop
Option A: Desk Clamp Install
1. Remove the 3pcs M5X20 bolts at the bottom of the pole (a) with hex key, see Figure 1A.
2. Install the clamp brace (c) to the pole (a) using 3pcs M5x20 Bolts, and tighten using the hex
key (E), see Figure 1.
3. Install the “c’-Clamp (b) to the pole assembly according to the thickness of the desktop.
