RPM alarm: default value is 6000 r, it means this device will give alarm when RPM over 6000 r
BAT Alarm: default value is 10.5V, it means this device will give alarm when battery voltage is lower than 10.5V
Speed Adjust: adjust the speed according to the dashboard, default value is 107%
Speed Offset: When the vehicle turns off, but the device speed is not 0, then adjust the device Speed Offset value, if the
device speed shows 5KM/H, then change the device Speed Offset default value at 5
BAT Adjust: if the battery voltage is different with the vehicle, it can be adjusted.
Engine Size: the default value is 1.6 L, if the fuel consumption is much different with the dashboard, please change it as the
Displacement size
Fuel adjust: default value is 100%,it can be adjusted
Change Color 1: the top functions color on the screen
Change Color 2:the left side /middle functions color on the screen
Change Color 3:the right side /bottom functions color on the screen
Brightness: default 0(Automatic sensitivity),1-6(the brightness will be increased as the digital added)
CWT Unit : default coolant temperature is °C, also can be changed to
℉
Speed unit: default is KM, can be changed to Mile
Sum distance: can make the total driving distance same as dashboard(if the dashboard shows the sum distance is
30000Km,the user can make the device value at 30000KM)
Power off time: default power off time is 10s,for Auto start and stop cars, please make the power off time to 180-240s
Sleep Voltage: default is off ,if the device can’t auto off, please adjust the voltage at 13.2V or higher
Factory set: short press in to do the factory set
Error code set
Scan DTCs: scan the ECU to check if there is the error code, and show the error details
Clean DTCs: switch to Clean the DTCs, short press in the button to finish the cleaning
Driving test
