Setting button functions
1.
Short press in:(1) switch the display mode (2)confirm the menu after enter into the menu
2.
Push left:(1)switch the left area functions(2)change the function setting after enter into the menu
3.
Push right:(1)switch the right area functions(2)change the function setting after enter into the menu
4.
Long press in: after enter into the menu and finish the setting, long press in for 5 seconds to keep and exit.
Push left/right to switch function:
Below are function abbreviations
ECT-engine coolant temperature VLT-Voltage FUE-fuel consumption
RPM- Revolutions Per minute ODO-odometer
TIM-driving time DIS-driving distance
Factory set:
Press in the setting button to find the system setting, and then short press in the button to enter into the menu, push right to
switch to the factory set, and long press in to keep and exit.
Eliminate the fault code:
When the device scan the program successfully, long press in the button to enter into the setting menu, then push right to
switch to the troubleshooting, short press in, then find the eliminate the fault code function, long press in to finish.
Setting Mode(Menu mode)
Long press in to enter into the setting mode, push right to choose the menu, and short press in to confirm. Once finishing the
setting, long press in to exit.
