resolution will be 480i/480p/720p/1080i/1080p.
OSD SETTING:
Transparency: Set the OSD transparency from 0% to 60%.
Brightness: Set the OSD transparency from 20% to 100%
Chroma: Set the OSD transparency from 20% to 100%
Contrast: Set the OSD transparency from 20% to 100%
OSD Timeout: Select the duration of displaying Info bar, 3s,5s and 8s for optional.
PANEL SETTING:
LED BRIGHTNESS: Adjust LED brightness of front panel. There are three levels: full/low/middle.
LED DISPLAY: Time/Ch no. Choose time to display current time in LED and choose Ch no. to display current
channel number.
SYSTEM
Parental Guidance:
Set the age limit for channels. The age range is from 4~18.Limited channels will be protected
by a password”000000”. Default value is Off.
Lock Control:
Press “000000” password to enter menu to set menu lock/channel lock.
Menu lock is used to control the limit of menu operation, searching channels and SW upgrading.
Channel lock is used to control the limit of channel edit.
New Password: Enter new password.
Confirm Password: Confirm the new password.
Note: Default Password is 000000. There is also a Master PIN, in case of forgetting
the password that you were set. The mater PIN is 873543.
Factory Reset:
If you choose to restore Factory Settings, the Channel Lists and all Settings will be deleted. Entering
password is “000000”.
System information:
Displays Information about the Lib, application, hardware version.
Software Upgrade:
USB Upgrade
Section: All
File Path: Choose correct software bin file
Start: Press OK to start upgrading process.
