NeoGate TB400 User Manual
10
·Overlap Dial
Whether MyPBX can dial this switch using overlap digits. If you need Direct
Dial-in (DDI; in German \"Durchwahl\") you should change this to yes, then
MyPBX will wait after the last digit it receives.
·PRI Indication
Tells how MyPBX should indicate Busy() and Congestion() to the switch/user.
Accepted values are:
inband: MyPBX plays indication tones without answering; not available on all
PRI/BRI subscription lines
outofband: MyPBX disconnects with busy/congestion information code so the
switch will play the indication tones to the caller. Busy() will now do same as
setting PRI_CAUSE=17 and Hangup().
·Enable Facility
To enable transmission of facility-based ISDN supplementary services (such as
caller name from CPE over facility), enable this option.
·Nsf
Used with AT&T PRIs.If outbound calls are being rejected due to \"Mandatory
information element missing\" and the missing IE is 0x20, then you need this
setting.
·Echo Cancellation
Disable or enable echo cancellation.
·Hide CallerID
Whether to Hide Caller ID.
