mPBX-100/100R User Manual
Page 91
Step6: Click the
Save
button to save the settings.
Step7: Reboot the device.
Step8: Check the WAN’s Status (System Info
WAN
Status).
·PPPoE
If your DSL provider says that you are connecting through PPPoE or if you
normally enter a user name and password to access the Internet, perform these
steps:
Step1: Select
PPPoE
as the WAN Connection Type.
Step2: Enter the User Name.
Step3: Enter the Password.
Step4: Click the
Save
button to save the settings.
Step5: Reboot the device.
Step6: Check the WAN’s Status (System Info
WAN
Status).
Figure 3.6.2
3.6.3 Static Route
mPBX will have more than one internet connection in some situations but it has
only one default gateway. You will need to set some Static Route for mPBX to
force it goes out through different gateway when access to different internet.
The default gateway priority of mPBX from high to low is OpenVPN
WAN
port
LAN port.
1)
Route table
The current route rules of mPBX
·Destination
The destination network to be accessed to by mPBX
·Subnet Mask
Summary of Contents for mPBX-100
