Well mPBX-100, User Manual

Page: 85 / 140

mPBX-100/100R User Manual
Page 85
•
The system administrator can configure certain numbers or types of numbers
to require entry of a PIN before you can continue making a call to such a
number.
•
The system administrator can also configure you to have to enter a PIN before
making any external call.
·Name
A character-based name for this PIN list, i.e. ‘WellPIN’
·PIN List
Enter a list of one or more PINs, One PIN per line.
·Outbound Route
PIN User can use those outbound route to make call out.
Figure 3.5.12
3.5.13 Callback Settings
mPBX allows caller A to dial an inbound route number, and after hearing the ring,
A can hang up the call or wait for mPBX to cut off the call, then mPBX will call A
with this number. When A pick up the call, A can dial the number he wants to call;
mPBX will call the number with its outbound route.
Note:
1. If you’d like to use callback feature, please make sure if it’s enabled on the
inbound route setting panel.
2. No callback rules needed to be set if the trunk supports call back with the
caller ID directly.