PRODUCT STRUCURE
Main structure
: Lamp shell adopts high quality PC materials
1.
MAIN STRUCTURE PARAMETERS
Input voltage: AC 220-240V 50Hz
Safety level: Class II
Proof level: IP20
Installation place: indoor
2.
INSTALLATION REQUIREMENTS AND MAINTENANCE
1)
Cut off Power Supply
2)
Lock of clamp with screw
3)
Connect power cord
4)
Put one side of the lamp onto both clamps
5)
Put another side of the lamp onto the clamp
6)
Check if any safety hazard exists after installation, then connect power supply and check if
the light works ok.
3.
ATTENTIONS
3.1
The product must be installed by professionals
3.2
This product is strictly forbidden for high humidity environment.
3.3
If the shell is seriously damaged or the lens is broken, the product is unqualified and it can’t be
used.
This product is not suitable for covered by heat insulating material
(Warning: the lamps can’t be covered by any heat insulat
ion material whenever)
In order to make the lamps installed correctly, after unpacking, please read this manual carefully, and
properly keep it.