2
Features of Your Radiant Heater
Handle
Congratulations on the purchase of your new Linda Radiant Heater.
Before using your new heater, it is important that you read and
follow the instructions in this Use and Care booklet, even if you feel that
you are quite familiar with this appliance. Find a place to keep this booklet
handy for future reference. Attention is drawn to section dealing with
‘IMPORTANT SAFEGUARDS.’
This appliance has been designed to operate from a standard
domestic power outlet. It is not intended for industrial or commercial use.
Power Switch
Tip Over Switch
Operation
•
When operating the heater for the first time or after a period of prolonged storage it is normal for
the heater to emit a burning smell, fumes and a little smoke around the Heating elements and
Ceramic mounting lugs.It requires only a few minutes of “burn in” time for the smell, fumes and
smoke to disappear and this “Burn In” time should ideally be conducted in a well ventilated
area before moving the heater to its intended position for ongoing use.
•
Place the heater on a level surface in a stable upright position. Make certain the power switch is
in the “OFF” position.
•
Insert the plug into a suitable outlet.
•
Switch on on the heating level “ 400W”, the lower heating tube will be in use, switch
on the first heating level”400W’, the upper heating tube will be in use. Switch on the heating level “800”,
both the lower and upper heating tube will be in use.
•
After use, turn off the switch and pull out power cord.
•
Allow to cool before putting away.
Note: The heating tube will be red while switching on the heat setting for a moment.
