USER’S MANUAL
TABLE FAN
3
USE
Unroll the power cord completely
Check that the tension in force in the country where you are corresponds to that indicated on the apparatus.
Connect the apparatus in a correct socket outlet and connected to the ground to avoid any danger.
Disconnect the power source cable before any operation of cleaning, mentenance and accesories assembly.
Never modify the appliance in anyway.
Adjust speed by pressing the buttons on the bottom of the unit.
0
– STOP; 1 – Soft speed ; 2 – Fast speed
Oscillation: Press the oscillation button on the motor housing to activate the oscillation function. Pulling up on the oscillation button to stop it.
CLEANNG AND MENTENANCE
Allways unplug the appliance and let it cool before cleaning.
Clean the outside of the appliance with a sponge or damp cloth.
Never immerse the appliance in water or other liquids.
Never use abrasives, wire brush or other sharp object.
The front and rear gates can be cleaned with a brush or a soft , damp cloth.
The motor housing and feet can be cleaned with a damp cloth.
Use only original accesories.
STORAGE
– Ensure the unit is completely cool and dry.
– Do not wrap the cord around the appliance as this will cause damage.
– Keep the appliance in a cool, dry place and aut of reach from children.
Always unplug the appliance before any claning or maintenance operation and accesories assembly.
Disconnect the electrical mains supply cable before any maintenance , cleaning operation and installation of accesories.
The device should not be exposed to moisture or rain
ECOLOGICAL INFORMATION
Waste electrical and electronic equipment are a special waste category, collection , storage, transport , treatment and recycling are important
because they can avoid environmental pollution and are harmful to health
Submitting waste electrical and electronic equipment to special collection centers makes the waste to be recycled properly and protecting the
environment.
Do not forget !Each electric appliance that arrive at the landfill, the field , pollute the environment!
Importator şi distribuitor:
SC VITACOM ELECTRONICS SRL
CIF: RO 214527
400495 Cluj-
Napoca, Str. Bună Ziua FN
Tel: 0264-438401*
