GETTING STARTED
1. Insert one end of the line cord to the line jack of the base and the other end to the wall outlet of
exchanger. The time and date will be display on the liquid crystal screen after the line cord is
inserted.
2. If you want to keep incoming and outgoing calls information even when the line cord has lost the
connection, you can insert 3×1.5AA batteries.
3. Connect the handset and the unit with coiled line.
4. Set the dialing mode to correct mode according to the directions from your local telecom.
5. Apply for the caller ID service from your local telecom office.
WALL MOUNTING
1. The telephone can be wall mounted. Mark two points 72mm apart on the wall. Drill holes into
the wall 72mm apart. Insert plugs and screws (not included) in the wall and clip in the telephone
base by inserting the screws into the wall mount slots at the back of the telephone base. Adjust the
screws if necessary.
2. Slide out the parking hook as indicated. Turn it around and slide back into position again. Place
the handset on the cradle with the parking hook on the cradle arranged to fit into the parking
recess under the earpiece on the handset.
