15
Powerline Ethernet Adaptor
Password
column by default is blank and ‘Enter Password’ button can be used to enter it.
To set the
Password
of the device (required when creating a private network), first select the
device by clicking on its name in the lower panel and then click on the Enter Password button. A
dialog box will appear as shown in Figure 3-3 to type the password. The selected device name is
shown above the password field and the password can be verified by hitting the OK button. The
Password field accepts the Device password in any case formats, with or without dashed
between them. If a device was not found, the user will be notified along with the suggestions to
resolve common problems. This process might take a few seconds to get completed.
Figure 3-3: Set Device Password
Summary of Contents for 500Mbps
Page 1: ......
