8
To make changes in the standard program:
DOWN
FAN
TIME
TIMER
FLAME
BACK
SET
RETURN
PROGRAM
REVIEW
AHEAD
-
+
MODE
UP
1. Press
PROGRAM/REVIEW
for 4 sec. The shaded
boxes on the LCD-screen with the words
PROGRAM FOR
and
START AT
will begin to flash.
The current day, period, time and set temperature
of the built-in factory program will also be displayed.
2. To program the
DAY
and
PERIOD
of
DAY
, press
AHEAD
or
BACK
to display the
DAY
and
PERIOD
you wish to program.
3. Press
PROGRAM/REVIEW
. to confirm, and
TIME
will flash on the LCD-screen.
DOWN
FAN
TIME
TIMER
FLAME
BACK
SET
RETURN
PROGRAM
REVIEW
AHEAD
-
+
MODE
UP
4. Press
UP
or
DOWN
to program the
START TIME
.
Programmed start time settings are in 15
min.-segments. The new start time will display on
the LCD-screen.
5. Press
PROGRAM/REVIEW
to confirm:
SET TEMP
will flash on the LCD-screen.
DOWN
FAN
TIME
TIMER
FLAME
BACK
SET
RETURN
PROGRAM
REVIEW
AHEAD
-
+
MODE
UP
6. Press
UP
or
DOWN
to program the
SET
temperature.
7. When the desired
SET TEMP
displays, press
PROGRAM/REVIEW
to confirm.
8. After pressing the
PROGRAM
/
REVIEW
button in
step 7, the next
PERIOD
of the same
DAY
or next
DAY
will display on the LCD-screen.
DOWN
FAN
TIME
TIMER
FLAME
BACK
SET
RETURN
PROGRAM
REVIEW
AHEAD
-
+
MODE
UP
9. To program the next period, follow steps 3, 4, 5, 6
and 7.
10. Continue to follow steps 3, 4, 5, 6 and 7 until all
7 days and the 4 time periods in each day are
programmed.
11. Once all the programming has been completed,
press
SET/RETURN.
The programming data that
has been entered will now over-ride the factory built-
in program and operate your remote control system.
NOTE:
Once you are in the programming process and you want to advance the programming procedure, you may bypass
some of the DAYS or PERIODS OF DAY, by pushing the
AHEAD
or
BACK
buttons. This allows you to eliminate the need
to enter the TIME and TEMP for each DAY/PERIOD, speeding up the programming process by skipping some of the
‘software prompts‘. Once the DAY/PERIOD you want to reprogram is displayed by the LCD-screen, press
PROGRAM/REVIEW
and follow the programming steps outlined above.
Summary of Contents for RC-16B
Page 14: ...14...
