Well Straler RC-16B, User Manual

Page: 7 / 15

7
2.4. Program operation of remote control
The transmitter has a factory program built-in standard program. Each day has been broken into four periods and each
period has its own starting time and temperature. A chart of the built-in programs is pictured below
You may change any of the factory settings by following the procedures below. Should you wish to return to the factory
program, follow the procedure under heading 2.4.3 Program cancellation.
2.4.1. Programming day/period of day/temperature
CUSTOM PROGRAM:
DAY
Morning Day Evening Night
Hour Temp Hour Temp Hour Temp Hour Temp
SU
MO
TU
WE
TH
FR
SAT
You may change the built-in time and temperature programs to suit your personal schedule. Each day is divided into four
periods: MORNING, DAY, EVENING and NIGHT. A blank programming chart is provided above to record your customized
time and temperature settings If desired, you may change a single day or all seven days that have the built-in factory
program. To change one or all seven days, complete the following steps.
NOTE: If the initial SET-UP and settings were not previously completed and you go into programming mode, the
LCD-screen will display SU, MORN, TIME and SET temperature digits. You must go back and perform the initial
set-up procedure or the remote will not operate properly in the PROGRAM MODE.
DAY PERIOD hour / temperature
Every day of the week
MORN 6:00 am 21°C
DAY 8:30 am 16°C
EVE 3:00 pm 21°C
NIGHT 11:00 pm 18°C