- 19 -
lightening. Then press ▲5 and
▼6
button to adjust the gray scale of image. The adjustment range is
GY0-GY7.
Press
to exit.
Tip:
When an external monitor is applied, the image might be properly displayed only by gray scale
correction.
4.7 Dynamic range adjustment
Press 7 or
8 button in real-time state to active this function. The “DR” on the right of screen is
lightening. Then press ▲5 and
▼6
button to adjust the dynamic range. The dynamic range is 0-192dB, and
the adjustment range is 64-192dB.
Press
to exit.
4.8 Depth adjustment
Press
to exit the parameter adjustment state on the right of screen.
Press ▲5 and
▼6
button in the B type real-time mode to switch the current scanning depth. The current
depth is displayed on the bottom right of screen. The depth adjustment range changes with different probe
type. The following table is presented as a reference.
Probe
type
C1-11/50R/3.5
MHz
L1-5/7.5MHz
C1-12/20R/5.0
MHz
LV2-4/6.5MHz
35LV150CP
depth
（
mm
）
90
～
240
40
～
90
80
～
150
65
～
140
70～170
Depth 90 Depth 180 Depth 240
4.9 Scanning angel adjustment
Press 7 or
8 button in real-time state to active this function. The “Angel” on the right of screen is
lightening. Then press ▲5 and
▼6
button to switch the scanning angel. When mentioning probe angel,
please refer to the following table.
