WEB-2000
User’s
manual
9
2.2
How
to
Install
the
Unit
Connecting
the WEB-2000 to your TV and phone line is easy. Refer to the following
instructions
and illustration:
1.
Connect the AV cable to the audio/video ports on the WEB-2000 and your TV
set.
If your TV supports S-video, connect the S-video cable from your TV to the
S-video
output port on the WEB-2000. If your model has a VGA port then you
can
also connect a monitor to that port.
2.
Connect the RJ-11 phone cord to the phone line-in port on the WEB-2000.
Connect
the other end to a phone jack.
3.
Check the switch mode setting. (Refer to section 2.2.1 for details.)
4.
When connecting the power adapter, always connect the DC 5V connector to
the
WEB-2000 first, then to the power outlet.
Figure
2-3
Connecting
a
VGA
Monitor
or
TV
(with
S-video/AV
Jacks)
