WEB-2000
User’s
manual
14
2.5
How
to
Configure
the
Parameters
Refer
to the following instructions to configure the parameters. (Refer to related
information
provided by your ISP where necessary.)
l
Press the
SETUP
key on the Remote Control to bring up the main menu of the
Setup
Environment and use the Direction keys of the Remote Control to select the
environment
you want to set up.
l
Use the Direction keys to select the items you want to set up or re-edit and press
ENTER
to call up the block, then key in the information. (Refer to the section,
Using
the
On-screen
Keyboard
on page 13.)
l
Select “
Ok
”
on the screen after completing your changes, then press the
ENTER
key
on the Remote Control to confirm and store the configuration.
l
Repeat the steps above to complete the settings for all environments.
The
pre-setup
screen
The
following screen will be shown when the WEB-2000 is first used and has not yet
been
set up.
WebSite
shows
the current Web site address
--:--
shows
the Web site timer
Transmitting
Light
the
lights well flash with a rotate
when downloading data
Figure
2-8
The
Pre-Setup
Screen
