Weldex WDP-4602MXV, Owner'S Instructions Manual

Page: 17 / 50

IP Scan Tool
IP Scan Tool
After physically connecting the network camera to the network, run the ‘ IPScan.exe’ application on
the software CD. This program will scan for Weldex cameras on the network, regardless of the unit’s IP
address. Once you locate a unit, you may change the network settings
17
This document contains confidential and proprietary information of Weldex Corporation.
NETWORK INSTALLATION & SETUP
Note
Verify that the computer where you will run the ‘IPScan.exe’ file is on the same network as the
unit you wish to locate. Units on a different network will not appear when running the search
function.
IP Scan Tool Functions
Item Functions
①
Search Searches for the connected Weldex network camera.
②
IP Setup
View/Edit IP settings for the selected Network Camera (Device ID, IP
address, Subnet mask and Gateway).
Administrator’s password is required.
③
Web Browser
Connects to the selected Network Camera using the default web-
browser.
④
Device Info Displays device info for the selected Network Camera.
⑤
Factory Default
Restores factory defaults for the selected Network Camera
Administrator’s password is required.
① ② ③ ④ ⑤
⑥ ⑦ ⑧ ⑨ ⑩