Hardware Overview (Appearance)
Hardware Overview
10
This document contains confidential and proprietary information of Weldex Corporation.
INSTALLATION
INSTALLATION
Item
Description
①
Height-Strip cover : Acryl
Height-Strip cover for the lens and unit protection.
②
Factory reset switch
Press and hold this button for 5 seconds while the unit is turned on.
- System LED should be turned ON when performing factory reset.
- The LED next to the switch will flash 3 times after a successful
reset.
③
C-MIC connector
Used for microphone input
④
Main body Set
Main body chassis
⑤
Ethernet port
Network port
⑥
Sensor-in/Alarm-out port
Used for sensor input & alarm output
⑦
Audio-out port
Use this port to output audio to speakers
⑧
Video-out port
⑴
Composite Video Output
⑨
Power-in port
Power input port (not needed if PoE is being used)
Note
(1) Video output connector is used only for installation purposes. It should not be used for
recording or surveillance purposes.
Summary of Contents for WDP-4602MXV
Page 1: ...V 1 0...
