13
You can specify Mask 1 and 2 simultaneously. The mask is used only for
determining the filter switch and any excessive bright area at night will be
masked.
※
Note:
-If
BACKLIGHT
is set to
BLC
, the
MASK AREA
function will be deactivated.
◇
EXT
This enables an auto switch between
DAY
and
NIGHT
modes using the
interface with the external sensor.
(For IR LED models, inside CDS sensor
will control IR LED ON/OFF.)
●
WHITE BAL [DAY/NIGHT]
If you want to adjust the color scheme, use the
WHITE BALANCE
function.
◇
DAY
in
DAY
mode, you can set the color values of
RED
and
BLUE
. The
screen will be displayed in colors according to your settings.
※
Note:
-You can set the values of
R-GAIN
and
B-GAIN
only in
AWC
mode.
◇
NIGHT
Use the
NIGHT
mode if you want to set the white balance
differently according to the ambient luminance. If the
NIGHT
mode is set to
OFF
, the white balance will always operate as set in
DAY
mode; if not to
OFF
, the camera will switch to as set in
DAY/NIGHT
mode according to the
brightness. In
NIGHT
mode, you can set the values of
RED, BLUE
and
BRIGHTNESS
. The screen will be displayed in colors according to your
settings.
※
Note:
-
You can set the values of
R-GAIN
and
B-GAIN
only in
AWC
mode. -If
AGC
is set to
OFF
or
FIX
, you can not access the
NIGHT
menu.
For adjusting the white balance, the following 5 modes are provided:
◇
ATW1 (Auto Tracing White Balance mode 1):
The camera can
automatically adjust the color temperature in real time, according to the
ambient conditions. The color temperature ranges from approx. 2500K to
9300K.
