Weldclass WeldForce WF-205MST Operating Instructions Manual Download | Manualshive

Page: 67 / 80

background image

WF-205

MST

© Weldclass 2019 | E.&O.E. | Edition 2.1

67

Please refer to Weldclass website

www.weldclass.com.au

for more information.

15.1

Store and Retain this Manual

Retain this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance
and cleaning procedures. Write the product’s serial number into the NOTES section at the rear, and keep
this manual and the receipt in a safe and dry place for future reference.

15.2

Important Safety Information

Failure to follow the warnings and instructions may result in electric shock, fire, serious injury and/ or death.
Save all warnings and instructions for future reference.
This is the safety alert symbol to alert you to potential personal injury hazards:

Obey all safety messages that follow this symbol to avoid possible injury or death.

DANGER! indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING! indicates a hazardous situation which, if not avoided, could result in death or serious

injury.

CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

NOTE, used to address practices not related to personal injury.

CAUTION, without the safety alert symbol, is used to address practices not related to personal injury.

15.3

Welding Operation

1.

Maintain labels and nameplates on the welder. These carry important information. If
unreadable or missing, contact Weldclass for a replacement.

2.

Avoid unintentional starting. Make sure the welder is setup correctly and you are prepared to
begin work before turning on the welder.

3.

Unplug before performing maintenance. Always unplug the welder from its electrical outlet
before performing any inspection, maintenance, or cleaning procedures.

4.

Never leave the welder unattended while energised. Turn power off before leaving the welder
unattended.

«
...
65
66
67
68
69
...
»

Summary of Contents for WeldForce WF-205MST

















































































Reviews:

No comments

Related manuals for WeldForce WF-205MST

Brand: Wayne Pages: 16

Brand: Ultrasonic Pages: 16

Aqua-Pure AP510

Brand: 3M Pages: 16

Brand: Nacon Pages: 12

Brand: iHome Pages: 3

Brand: iHome Pages: 17

Brand: QSC Pages: 2

Brand: QSC Pages: 2

Brand: QSC Pages: 16

Brand: QSC Pages: 4

Brand: Power Acoustik Pages: 5

Smarty 4X P 1.1

Brand: Salda Pages: 30

Brand: Wayne Pages: 1

Brand: AmeriWater Pages: 67

Brand: Advent Pages: 32

ThermoPro G4 Series

Brand: Curtis Pages: 40

Scalekleen EV9796-01

Brand: Everpure Pages: 2

CSMP80 - Multimedia Speaker System

Brand: Coby Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands