Care & Maintenance
OPT
General Care:
To ensure a long life for your Weld-i
®
Zoom HD, it is important to
keep it clean and free of corrosive materials. Wipe down the
camera head and cable regularly, keep all connectors free of debris
and dust, use a spatter shield in front of the lens, and always follow
the instructions as described in this manual.
AC Fuse Replacement:
1)
Turn the power to the system ‘Off’ using the rocker switch on the
rear panel of the Camera Control Unit.
2)
Unplug the cable from main power and from the rear panel.
3)
Turn the Fuse Holder counter clockwise until fuse holder is free.
4)
Remove the fuse holder and remove the defective fuse.
5)
Replace the fuse with a new 1 amp Slow Blow fuse.
6)
Turn the Fuse Holder clockwise until tightened.
7)
Plug the power cable into power strip and into the Camera
Control Unit
8)
Power the system ’On’.
16
