Assembly
5.
Plug Communication Cable into rear of Camera Head
(Connection 4).
6.
Plug Communication Cable to RS-232 connector on rear of
Camera Control Unit (Connection 4).
7.
Plug 3G-SDI Cable into rear of Camera Head (Connection 3).
8.
Plug 3G-SDI Cable into Monitor* with 3G-SDI input
(Connection 3) (*Monitor not included).
9.
Plug Power Cable into rear of Camera Head (Connection 6).
10.
Plug Power Cable into Power Adapter (Connection 6 to 7).
11.
Plug Power Adapter into Power Strip* (Connection 7) (*Power
Strip not included).
12.
Power on Monitor and video will appear.
13.
Turn ON Power Switch on rear of Camera Control Unit.
14.
Wait 10 seconds or until “VERSION 1.1” disappears from the
top left of the picture before using Camera Control Unit.
10
