background image

Thank you for purchasing the Welch Allyn Model 678 SureTemp

®

thermometer.  The operating and maintenance instructions found in this
manual should be followed to ensure years of accurate and reliable service.
Please read these instructions thoroughly before using your 678 SureTemp

®

thermometer.

Technical service manuals may be ordered by contacting Welch Allyn
Customer Service at (800) 854-2904.

© 1997 by Welch Allyn, Inc.  All rights reserved.  No part of this manual may be reproduced or transmitted in any form
or by any means, electronic or mechanical, including photocopy, without prior consent in writing from Welch Allyn.
Printed in the U.S.A.

U.S. patent 5,632,555.   Additional U.S. and  foreign patents pending.

The CE mark on this product indicates it has been tested to and conforms with the provisions
noted within the 93/42/EEC Medical Device Directive.

European Regulatory Manager, Medical Division
Welch Allyn Ltd., Navan, Co. Meath

Republic of Ireland

15

SPECIFICATIONS

• Patient Temperature Range:  84.0°F - 108.0°F (28.9°C - 42.2°C).

• Calibration Accuracy:  +0.2°F (+0.1°C).

• Dimensions (approximate):  

2.25 in x 3 in x 7 in (5.72cm x 7.62cm x 17.78cm);

weight 10.5 oz (300 gr).

CUSTOMER SERVICE

For customer service, technical or clinical support,  please contact Welch Allyn
at (800) 854-2904 from 7:00 AM to 5:00 PM Pacific Time.

Summary of Contents for SureTemp 678











Reviews: