Welch Allyn SCANTEAM 3700 CCD, Technical Manual, Page: 38 / 76

4–12 Configuring the SCANTEAM 3700
Set Code 39 Command Kp
COMMAND <Kp enable, require checksum, send checksum, minimum
length, maximum length>
Parameter ASCII Option
Enable 0 no
1 yes *
Require Checksum 0 no *
1 yes
Send Checksum 0 no *
1 yes
Minimum Length Set from 1 to 48 * (1)
Maximum Length Set from 1 to 48 * (48)
Sending the configuration command Kp sets Code 39 and all its parameters:
enable/disable, require checksum, send checksum, minimum length, and maximum
length. The default setting is Code 39 enabled, doesn’t require or send checksum,
minimum length 1, and maximum length 48.
Set Codabar Command Kq
COMMAND
<Kq enable, send start/stop, minimum length, maximum
length>
Parameter ASCII Option
Enable 0 no
1 yes *
Send Start/Stop 0 no
1 yes *
Minimum Length Set from 1 to 60 * (6)
Maximum Length Set from 1 to 60 * (60)
Sending the configuration command Kq sets Codabar and all its parameters:
enable/disable, send start/stop, minimum length, and maximum length. The default
setting is Codabar enabled, send start/stop, minimum length 6, and maximum length 60.