NOTES
SCANTEAM 3000/PDF Programming Menu
The SCANTEAM 3000/PDF Programming Menu is used to program the 3000
Decoded Output PDF417 Capable CCD Reader.
The SAMPLE BAR CODES page (near the end of the programming menu) contains
bar code symbols that you may use to verify that you have programmed your
SCANTEAM 3000/PDF correctly.
Input Power Voltage Requirements
Model
Input Power Voltage
Disclaimer
Welch Allyn
reserves the right to make changes in specifications and
other information contained in this document without prior notice, and the
reader should in all cases consult Welch Allyn to determine whether any
such changes have been made. The information in this publication does
not represent a commitment on the part of Welch Allyn.
Welch Allyn shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential
damages resulting from the furnishing, performance, or use of this
material.
This document contains proprietary information which is protected by
copyright. All rights are reserved. No part of this document may be
photocopied, reproduced, or translated into another language without the
prior written consent of Welch Allyn, Incorporated.
3000–X3
3000–X2
3000–X4
5 Volt or 12 Volt
5 Volt ONLY
!
