990154 Rev. A
10
6SHFLILFDWLRQV
Power
100-240 V~, 50 / 60 Hz,
0.75A - 0.35A using external DC
power supply delivered with unit.
Air
80 psi to 130 psi (550 kPa to 896
kPa) with at least 1.2 cfm (34
l/min) recommended
Size
10” x 15” x 10” (25cm x 38cm x
25cm)
Weight
12 lbs. (5.5 kg)
Environment
Operational
Temp: 50
°
F (+10
°
C) to 104
°
F
(+40
°
C)
Relative humidity: 30% to 75%
Pressure: 10.15 psi (70 kPa) to
15.3 psi (106 kPa)
Transport and
Storage
Temp: -40
°
F (-40
°
C) to 158
°
F
(+70
°
C)
Relative humidity: 10% to 90%
Pressure: 7.25 psi (50 kPa) to
15.3 psi (106 kPa)
Equipment
Classification
Class I (requires an electrical
earth ground) and ordinary
protection against ingress of
water
Applied Part: Type B
Mode of Operation:
Continuous Operation
Particle
Energy
Accuracy
The Particle Energy (PSI) display
is an internal pressure
measurement and should not be
interpreted as the precise
pressure at the handpiece nozzle.
Electrical
Fuses
There are no customer
serviceable fuses.
Options
A wide selection of abrasive
powders and nozzle tip angles
and sizes are available from
Welch Allyn / Kreativ.
5HF\FOLQJ
All recycling must be in compliance with relevant
national laws. Government authorized recycling centers
must be used. There are no hazardous materials in this
product.
Device
•
All covers and housings should be recycled
(steel or aluminum).
•
Plastic parts should be removed from the metal
pads before recycling (e.g., power inlet, footswitch
connector, main switch, etc.)
•
All printed circuit boards should be recycled as
electronic devices.
Accessories
•
All spare parts should be recycled as listed above.
•
Parts that have been in contact with the patient
should be cleaned and sterilized.
Packaging
The carton, all other plastics, and inserts should be
recycled (cardboard, foam, polyethylene).
Environmentally Relevant Materials
Components
Materials
Enclosure, all brackets
Steel, Aluminum, ABS
Printed Circuit Boards
Epoxy, FR4
SAVE THE CARTON! The Mach 7/8 and all
accessories are shipped in a single container. The
shipping container and packing materials should be
retained in the event that the instrument has to be
returned for service or repair.
Manufactured by
Welch Allyn / Kreativ, Inc. USA
7420 Carroll Road
San Diego, CA 92121
European Regulatory Manager
Welch Allyn LTD.
Navan, Co. Meath
Republic of Ireland
Ph: 353-46-79060
