Welch Allyn CP 200 Directions For Use Manual Download Page 82

Page: 82 / 92

Glossary

Welch Allyn CP 200 Spirometry Option

effort.

A single spirometry maneuver, for example, one blow. A single test comprises multiple efforts. See

also

best effort

ERS.

European Respiratory Society.

ERV.

Expiratory reserve volume (in liters). The maximum volume that can be expired from the level of the

functional residual capacity (FRC). See also

tidal breathing

extrapolation.

The practice of applying a norm’s formula to a patient who doesn’t fit that norm’s

demographics. For example, if you were testing an 88-year-old man, and the primary (selected) norm
were based on males 85 or younger, the predicted values would be extrapolated values.

FEF50/FIF50.

The ratio of these two parameters. See

FEF50

and

FIF50

FEF25.

Forced expiratory flow (in L/s) at 25% of FVC.

FEF50.

Forced expiratory flow (in L/s) at 50% of FVC.

FEF75.

Forced expiratory flow (in L/s) at 75% of FVC.

FEF85.

Forced expiratory flow (in L/s) at 85% of FVC.

FEF0.2-1.2.

Forced expiratory flow average (in L/s) between 0.2 and 1.2 liters of FVC.

FEF25-75.

Forced expiratory flow average (in L/s) during the middle half of FVC.

FEF75-85 (“late” FEF).

Forced expiratory flow average (in L/s) between 75% and 85% of FVC.

FET.

Forced expiratory time (in seconds). The elapsed time from the beginning of expiration until a

specified percentage of FVC.

FEV0.5.

Forced expiratory volume (in liters) at 0.5 seconds.

FEV1.

Forced expiratory volume (in liters) at 1 second. An important parameter because it reflects the

severity of COPD.

FEV1/FEV6.

The ratio of these two parameters. See

FEV1

and

FEV6

FEV1/FVC.

See

FEV1%

FEV2.

Forced expiratory volume (in liters) at 2 seconds.

FEV3.

Forced expiratory volume (in liters) at 3 seconds.

FEV5.

Forced expiratory volume (in liters) at 5 seconds.

FEV6.

Forced expiratory volume (in liters) at 6 seconds.

Summary of Contents for CP 200





























































































Search results

Summary of Contents for CP 200

Reviews:

Related manuals for CP 200

Brands by name

Popular brands

Welch Allyn CP 200, Directions For Use Manual

Search results

Summary of Contents for CP 200

Reviews:

Related manuals for CP 200

Brands by name

Popular brands