![Welch Allyn AT-1 Manual Download Page 48](http://html.mh-extra.com/html/welch-allyn/at-1/at-1_manual_954081048.webp)
38
38
Replacing the Recording Paper
NOTE: Welch Allyn can only guarantee an excellent
printout if Welch Allyn original chart paper
or a chart paper of the same quality is used.
The recording paper must be replaced as soon as the
end of the paper is indicated by a red stripe on the
lower edge. After the indication first appears, there
are about 8 pages left. However, we recommend that
the paper be replaced immediately.
If no paper is left, the printing process is interrupted
and the paper warning lamp starts to blink.
•
Push paper compartment release and lift up
cover.
•
Remove the remaining paper.
•
Place a new paper pack into the drawer.
•
Check that the printed (grid) side is facing
upwards, and place the beginning of the
paper over the guide roller.
•
Close lid and press firmly until release
catches.
•
Press
to transport the
paper to the start position.
Replacing the Recording Paper
NOTE: Welch Allyn can only guarantee an excellent
printout if Welch Allyn original chart paper
or a chart paper of the same quality is used.
The recording paper must be replaced as soon as the
end of the paper is indicated by a red stripe on the
lower edge. After the indication first appears, there
are about 8 pages left. However, we recommend that
the paper be replaced immediately.
If no paper is left, the printing process is interrupted
and the paper warning lamp starts to blink.
•
Push paper compartment release and lift up
cover.
•
Remove the remaining paper.
•
Place a new paper pack into the drawer.
•
Check that the printed (grid) side is facing
upwards, and place the beginning of the
paper over the guide roller.
•
Close lid and press firmly until release
catches.
•
Press
to transport the
paper to the start position.
Summary of Contents for AT-1
Page 24: ...14 14 Keyboard Keyboard ...