Instruction Manual & Warranty Information
9.
Using the Bedwetting Alarm
- continued
4.
Open the sensor clip via the lever and attach it to the child’s underwear/
pyjama pants (where urine is most likely). Ensure the sensor clip is closed
firmly on the fabric and that the cord does not hinder the child’s movement.
5.
At the first sign of moisture, the alarm will sound and/or vibrate to wake
the child. The LED indicator will flash blue.
6.
As soon as the child wakes up (they may need assistance from you),
they should go to the toilet and finish emptying their bladder. It is
important the child learns to go directly to the toilet before doing
anything else. Turn off the alarm and unclip it from the child’s
underwear (you can teach the child to do this themselves).
7.
Clean and dry the product as per
Cleaning
instructions on page 12
and re-attach it to a clean dry pair of underwear or pyjama pants.
Helpful Hints
• Remind the child each night that when the alarm triggers and their
underwear is wet they need to stop ‘weeing’ and go to the toilet.
• Leave a night light on in case the child is frightened when the alarm
goes off. This will also help them navigate safely to the toilet in the dark.
• Make sure you are close enough to the child’s room to be able to hear
the alarm and help them as needed.
• Keep a spare set of sheets, underwear and pyjamas close by.
• The program may be slow and frustrating, but always remember to offer
encouragement and give praise when the child has a dry night.
Do not scold the child if they wet the bed.
• Restricting intake of liquids before bedtime does not help treat bedwetting.
It is important the child has enough to drink during the day.
• Drinks containing caffeine should be avoided.
WBA100_Instruction-Manual_110x80.indd 9
11/07/2018 11:16 AM
