Instruction Manual & Warranty Information
11.
Charging the Bedwetting Alarm
• The product has an in-built rechargeable Lithium-ion battery.
• When the battery power is low, the LED indicator will flash red.
• When the battery power has run out completely the LED indicator will not
light up and the alarm will not sound or vibrate.
• To charge the battery, turn the product to the OFF Mode and plug the USB
charging cable into the micro USB port on the product and then into a
USB charging device.
• The battery will take approximately 2-3 hours to charge.
• The battery can last for up to 7-8 hours of continuous alarming on Vibration
Only Mode & up to 4.5 hours of continuous alarming on Sound & Vibration
Mode.
• The LED indicator will shine
red
whilst charging.
When the product is fully charged the LED indicator will turn solid
blue
.
•
DO NOT
use the product while it is charging.
Plug into USB
charging device
Place switch in
“OFF” position
WBA100_Instruction-Manual_110x80.indd 11
11/07/2018 11:16 AM
