14
Part Number: 9294098 01/18
Installation
Section 2
Model
BTU/Hour
Capacity
Heat of
Rejection
Charge
Reduced Work Height Refrigerated Front Breathers With Drawers
UCD4427N-6
1300
1690
9oz.
UCD4427N-9M
UCD4427N-12M
UCD4432N-12M
1300
1690
9oz.
UCD4448N-8
1300
1690
10oz.
UCD4448N-12
UCD4448N-18M
UCD4460N-8
3600
4680
11oz.
UCD4460N-12
UCD4460N-12M
UCD4460N-18M
UCD4460N-24M
UCD4464N-8
3600
4680
11oz.
UCD4464N-12
UCD4464N-12M
UCD4464N-16
UCD4464N-18M
UCD4464N-24M
UCD4472N-12
3600
4680
11oz.
UCD4472N-18
UCD4472N-18M
UCD4472N-24M
UCD4472N-30M
Level & Stable
After the cabinet has been placed in the desired location,
cabinets with legs must be leveled. Level units from front to
back and from side to side. Leveling will insure proper door
operation and removal of condensate. It is very important
that all legs are properly adjusted to keep the cabinet level,
evenly distribute the weight and to make sure the unit will
not rock, lean or be unstable.
Cabinets with casters must have the caster brake set so the
cabinet cannot move.
Leg & Caster Installation
DANGER
Legs or casters must be installed and the legs or casters
must be screwed in completely to prevent bending. When
casters are installed the mass of this unit will allow it to
move uncontrolled on an inclined surface. These units
must be tethered/secured to comply with all applicable
codes.
n
Warning
The unit must be installed in a stable condition with
the front wheels locked. Locking the front casters after
installation is the owner’s and operator’s responsibility.
n
Warning
Use a jack to lift the refrigeration unit off the ground
just far enough to remove the leg/caster. Place blocking
underneath the unit. Do not work underneath a raised
unit without proper blocking. Do not lift the unit more
than necessary to remove the leg/caster. Lifting the unit
too far can make the unit unstable.
,
Caution
All single-section units require that the swivel casters be
mounted on the front and rigid casters be mounted on
the rear.
