Page of 11
2
Thank you very much for choosing a Wel-Bilt™ product! For future reference, please complete the
owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to
become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be responsible for
issues arising from modification. We strongly recommend this machine not be modified and/or used
for any application other than that for which it was designed. If you have any questions relative to a
particular application, DO NOT use the machine until you have first contacted the distributor to
determine if it can or should be performed on the product.
For technical questions please call
1-800-222-5381
.
INTENDED USE:
The Rotary Tool has been designed with the hobbyist in mind and is ideal for intricate work or
creative projects. A variety of applications including engraving, grinding, cleaning, polishing, sanding,
cutting, carving and drilling can be performed with the Rotary Tool. Its flexible drill shaft is ergonomic
and allows greater control over the tool. It is intended for DIY only.
TECHNICAL SPECIFICATIONS:
Motor:
160W
Input:
120V ~ 60Hz
No load speed:
8,000 – 35,000 RPM
Collet chuck capacity:
1/8in.
GENERAL SAFETY RULES
WARNING:
Read and understand all instructions.
Failure to follow all instructions listed
below may result in serious injury.
CAUTION:
Do not allow anyone to operate or assemble this Rotary Tool until they
have read this manual and have developed a thorough understanding of how the Rotary Tool
works.
WARNING:
The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur.
It must be
understood by the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
