WEISS EQ1-DYN, Operation Manual

Page: 25 / 27

OPERATING INSTRUCTIONS FOR GAMBIT EQUALIZER EQ1-DYN TECHNICAL DATA
Daniel Weiss Engineering Ltd., Florastr. 42, CH-8610 Uster Page 25 of 27
) +41 1 940 20 06 2 +41 1 940 22 14 8 http://www.weiss.ch * weiss@weiss.ch
Dump Remote Control
All System-Exklusive commands consist of a header, a message type, possible data and the EOS (end of
system exclusive). Below is the format of the header:
Byte Value Description Section
1 F0 Sysex Header
2 00 Manufacturer's ID
3 30 Manufacturer's ID
4 5A Manufacturer's ID
5 07 Model ID: 6 = Gambit EQ DYN
6 0000nnnn Device ID: -> Midi channel number
Following is a list of the supported MIDI system exclusive commands (without header):
Snapshot format for dump. A complete dump consists of 128 snapshots:
Byte Value Description Section
1-6 ... ... Header
7 00000001 message = Snapshot dump Message Type
8 0nnnnnnn Package number ( 0..7F) Data
9 0nnnnnnn scale set number
10 - 265 0nnnnnnn 256 Bytes of Snapshot data
266 0ccccccc Checksum without byte one (F0 Sysex Command) Checksum
267 F7 EOS EOS
Dump request:
Byte Value Description Section
1-6 ... ... Header
7 00000010 message = dump request Message Type
8 F7 EOS EOS
Version request:
Byte Value Description Section
1-6 ... ... Header
7 00000011 message = version request Message Type
8 F7 EOS EOS
Version send:
Byte Value Description Section
1-6 ... ... Header
7 00000100 message = send version Message Type 4
8 0vvvvvvv OS Version data
9 0vvvvvvv DSP Version