Weiss Engineering INT204, Owner'S Manual

Page: 18 / 28

12
2.1.5 Power Supply
The INT204 uses two power sources. One is the bus power coming via the USB
connector. It powers the USB input section of the INT204 , which is isolated from
the rest of the circuit. The rest of the circuit (output section etc.) is powered
via the external power supply which is supplied with the INT204 .
2.1.6 Front Panel
•
Power switch
•
DSD conversion mode switches for word length and sampling frequency
selection
•
LEDs for power indication and sampling frequency indication
•
IR Receiver
2.1.7 Back Panel
• (1) XLR connector
•
(1) RCA connector
•
(1) BNC connector
•
(1) USB type B connector
•
(1) Power connector
2.2 Installation
Carefully unpack the INT204 . The following items should be enclosed:
•
the INT204 USB/DSD Interface unit
•
a Power Supply
• a CD with the necessary drivers for Windows. OSX does not require any
driver.
• this Owner’s Manual
•
a Certificate of Guarantee
2.2.1 Software installation
Perform the following installation procedure before connecting the INT204 to
the computer. The necessary files are supplied on the enclosed driver CD.
For Windows:
•
Launch
SETUP.EXE
found on the driver CD and follow the instructions.