·The supply voltage: The single 100 - 240V~, 50 – 60Hz.
·The measurement orientation: Six kinds of orientation.
·The use of the environment: 0
-
50
℃
, the relative humidity is 0 - 80
﹪
RH.
·The instrument outer case: The light grey in plastic cement.
·The dimensions: 29*20*19 cm.
·The weight: 1080g.
8.
THE INSTRUMENT MATAINCE
8.1 There is no reaction for the instrument after
power on.
Check out whether the power supply accessory work or not; check it by usage
another power supply accessory.
8.2 The instrument can start the test state after the
sound of “DI”, but it can't work after installing the
sensor.
Check out whether the watch work or not (and the amplitude is up 100°), and
make sure the watch crown can touch the sensor metal sheet.
8.3 The LED signal is in red, but the shown lines is
scattered or appear many lines.
Maybe the beat number was wrong, and adjusts the right beat number by
manual selection.
