Installation and operating instruction
Room device WEM-RG1
5 Operation
83310002 1/2017-11 La
16-20
5.8.3 Set brightness in setting mode
Adjust the brightness of the display in setting mode.
Setting range: 0 ... 30
Factory setting: 30
Press Manual operation
and Automatic operation
simultaneously for ap-
prox. 2 seconds.
The service level is activated.
Turn dial knob until parameter
2F
is displayed.
Press dial knob.
Current value of brightness is displayed flashing.
Set and confirm value required using the dial knob.
The value has been saved.
The standard display re-appears after approx. 30 seconds.
5.8.4 Set brightness in standby mode
Adjust the brightness of the display in standby mode.
Setting range: 0 ... 30
Factory setting: 0
Press Manual operation
and Automatic operation
simultaneously for ap-
prox. 2 seconds.
The service level is activated.
Turn dial knob until parameter
3F
is displayed.
Press dial knob.
Current value of brightness is displayed flashing.
Set and confirm value required using the dial knob.
The value has been saved.
Setting range: 0 ... 30
Factory setting: 0
The standard display re-appears after approx. 30 seconds.
